Cordless chainsaw technology has quietly closed the gap with gas-powered tools, and the current generation runs cooler, quieter, and easier to live with for routine yard work. Choosing among them means balancing bar length, battery platform, weight, and the kind of cutting you actually do, from storm cleanup to routine limb management.
The nine picks below span full-size saws, compact pole saws, an electric lopper, and a couple of replacement parts worth knowing about. Each one is sized for a specific job, so the right match comes down to your trees, your reach, and how much saw you want to carry around the yard.
The Picks In Brief
EGO POWER+ 20″ Chain Saw (CS2000)
Husqvarna Chainsaw Scabbard 13-16″
EGO POWER+ 16″ Chain Saw Kit (CS1613)
EGO POWER+ 16″ Chain Saw (CS1610)
BLACK+DECKER Lopper Chain Saw (LP1000)
EGO POWER+ 16″ Replacement Chain (AC1600)
WORX 8 Amp 10″ Pole Saw (WG311)
WORX 20V 8″ Cordless Pole Saw (WG349)
WORX 20V 10″ 2-in-1 Pole Saw (WG323)
The Picks, Examined More Closely
The CS2000 is the largest cordless saw in EGO’s outdoor lineup, and the 20-inch bar puts it firmly in gas-replacement territory. Owners running it on a recommended 6.0Ah ARC Lithium battery report roughly 230 cuts on a 4×4, which is a meaningful work session for storm cleanup or felling mid-sized trees. Because the saw runs on the 56V ARC platform, it shares batteries with the rest of the EGO ecosystem, so anyone already invested in that platform gets immediate value.
For properties with regular firewood processing or large branch management, the long bar covers more wood per pass, reducing the number of repositioning cuts. The brushless motor keeps the saw relatively quiet, and there’s no pull cord, fuel mixing, or exhaust to manage. For most homeowners with mature trees, that’s the right mix of capability and convenience.
Advantages To Know
- 20-inch bar handles larger trees and storm-felled limbs in fewer passes.
- Brushless motor delivers gas-comparable torque without the noise or fumes.
- Uses the same 56V ARC battery as other EGO outdoor tools, simplifying charging.
- Automatic chain lubrication reduces mid-cut maintenance stops.
Practical Considerations
- Battery and charger are not included, so the total cost rises sharply for first-time EGO shoppers.
- Long bar adds weight, and extended overhead use can tire out smaller operators.
Who It Suits Best
Owners with multi-acre properties, regular firewood needs, or frequent post-storm cleanup who already run EGO’s 56V platform.
Where Another Pick Suits Better
The WORX 20V 8″ Cordless Pole Saw (WG349) suits better when overhead reach matters more than bar length, and a lighter tool is the priority.
A blade scabbard isn’t a tool you cut with, but it’s the one accessory that keeps a sharp chain from cutting everything it touches when the saw is in storage or transit. Husqvarna’s OEM scabbard fits 13 to 16-inch bars, which covers most homeowner-class saws. It’s a genuine factory part rather than a generic sleeve, so the fit tends to be snug and the bar doesn’t rattle around inside.
The honest read is that anyone with a corded or gas saw should keep a scabbard on the bar between uses, especially in a garage with kids, pets, or other tools bouncing around. Storage is one of the most overlooked parts of chainsaw ownership, and this is the simplest fix.
Real-World Strengths
- OEM Husqvarna part, so fit matches factory tolerances for 13-16″ bars.
- Protects the chain from dulling during transport in truck beds or storage racks.
- Reduces accidental contact with the cutting edge when reaching into a shed.
Trade-Offs
- Plastic construction can crack if left in extreme cold or direct sun for long stretches.
- Limited to 13-16″ bars, so owners of larger saws need a different size.
Best Suited To
Anyone with a 13-16″ gas or corded chainsaw who stores the tool in a garage, shed, or truck and wants to protect the chain between uses.
Skip It When
Your saw is the EGO POWER+ 20″ Chain Saw (CS2000) or another model outside the 13-16″ range, where this scabbard simply won’t fit.
The CS1613 is the version most first-time EGO owners should look at first, because the kit includes a 4.0Ah battery, a charger, and the saw body. The 16-inch bar hits a sweet spot for limb work, small tree felling, and bucking firewood, and the brushless motor runs at chain speeds up to 20 m/s. That spec translates to clean, efficient cuts through standard softwood without bogging down on drier pieces.
On a 4.0Ah battery, the saw handles around 130 cuts on a 4×4, which is a solid session for routine yard work. The included battery also works with every other 56V ARC tool, so this kit becomes the entry point into a wider platform. For first-time buyers, the kit price is typically lower than buying the saw and battery separately.
A Strong Showing
- Includes battery and charger, so there’s no extra shopping before the first cut.
- Brushless motor rivals a 40cc gas saw without the maintenance overhead.
- 16-inch bar covers the most common residential cutting tasks.
- Tool-free chain tensioning reduces downtime for adjustments in the field.
Worth Bearing In Mind
- 4.0Ah battery is mid-sized; larger jobs benefit from a higher-capacity pack.
- Total kit cost runs higher than the tool-only CS1610 if batteries are already owned.
Right Fit For
New EGO customers who want a ready-to-use 16-inch cordless saw without buying accessories separately.
Consider Something Else When
The EGO POWER+ 16″ Chain Saw (CS1610) is a smarter pick for shoppers who already own a 56V ARC battery and don’t want to pay for a second one.
The CS1610 is the tool-only version of the same 16-inch EGO saw, which makes it the natural upgrade path for anyone already running a 56V battery. With a recommended 2.5Ah battery, the saw manages around 130 cuts on a 4×4, and a 5.0Ah or 6.0Ah pack extends that significantly. The brushless motor still delivers gas-class cutting performance without fuel mixing or pull-starting.
The same 16-inch bar and chain system means parts and accessories are interchangeable with the CS1613. For anyone who’s already bought into EGO’s outdoor lineup, the CS1610 is a sensible add-on rather than a duplicate investment. The omission of a battery and charger is the whole point, and it keeps the entry price noticeably lower.
Features That Help
- Lower price than the kit version, with no redundant battery shipped.
- Brushless motor matches the cutting power of comparable 40cc gas saws.
- Compatible with every 56V ARC battery, including older packs already on the shelf.
- Tool-free chain tensioning makes field adjustments fast.
Less Ideal Details
- No battery or charger in the box, so first-time EGO owners need a separate purchase.
- Smaller 2.5Ah battery option limits runtime on heavy cutting days.
Whose Shelf It Belongs On
Existing EGO 56V owners who want a second or replacement 16-inch saw without doubling up on batteries.
Not Your Match When
The EGO POWER+ 16″ Chain Saw Kit (CS1613) is the right call for shoppers who don’t yet own a 56V battery and need everything in one box.
The LP1000 isn’t a conventional chainsaw. It’s a 4.5-amp electric lopper with clamping jaws that grab a branch and cut it in one motion, more like heavy-duty shears than a saw. The 6-inch bar handles branches up to about 4 inches thick, which covers most pruning work on established shrubs, fruit trees, and ornamental growth. The corded design means unlimited runtime, which matters during longer pruning sessions.
For homeowners who climb ladders less than they prune trees, the clamping jaw action removes the awkward positioning that makes a top-handle saw risky. It’s a niche tool, but for that niche, it’s hard to beat. The trade-off is cutting capacity: this is a pruner, not a felling saw.
The Helpful Details
- Clamping jaws hold the branch during the cut, reducing kickback risk.
- 4.5-amp motor delivers consistent power for routine pruning work.
- Corded design means no battery management during long sessions.
- Lightweight body reduces arm fatigue when working overhead.
Possible Compromises
- Limited to about 4-inch branches, so larger limbs are out of reach.
- Corded operation requires an outdoor extension cord and limits mobility.
Who Should Grab It
Older homeowners and casual pruners who want a safer alternative to climbing with a regular chainsaw for small limb work.
Look Elsewhere When
The WORX 20V 10″ 2-in-1 Pole Saw (WG323) is a better fit for trimming branches overhead without leaving the ground, when reach matters more than clamping.
Every chainsaw chain dulls eventually, and a fresh chain is often the difference between a clean afternoon and a frustrating one. The AC1600 is EGO’s factory replacement chain for the CS1600 and CS1604 16-inch saws, with a low-kickback profile that helps during cuts where the bar tip is more likely to catch. Using the OEM chain matters because the drive links, gauge, and tooth profile are matched to the bar and motor.
Most saw owners will eventually want a backup chain, and rotating between two extends the life of each. Storing a spare also means downtime stays minimal when a chain gets damaged mid-job. For anyone running the CS1610 or CS1613, this is the chain designed to fit.
Where It Delivers
- OEM chain, so fit and cutting geometry match the 16-inch EGO bars exactly.
- Low-kickback design reduces the risk of bar-tip contact in awkward cuts.
- Keeps a spare on hand for uninterrupted work on larger jobs.
Some Limits To Know
- Compatible only with EGO 16-inch saws; it won’t fit other brands or bar lengths.
Perfect Match For
EGO 16-inch saw owners who want a factory-spec replacement or backup chain without compatibility guesswork.
Another Choice May Suit
The Husqvarna Chainsaw Scabbard 13-16″ is a better accessory pick when storage and chain protection matter more than a fresh cutting edge.
The WG311 combines a 10-inch chainsaw head with a pole that extends up to 10 feet, which keeps both feet on the ground while trimming high limbs. The 8-amp motor runs at a chain speed of 28 ft/s, fast enough for clean cuts through typical softwood branches. Automatic oiling keeps the chain lubricated without manual intervention, and a tension knob simplifies in-field adjustments.
For suburban yards with established trees, this is a sensible alternative to renting a lift or borrowing a taller ladder. The corded design means runtime isn’t a concern, though the extension cord does limit how far you can roam from an outdoor outlet. At roughly 10 lbs, it stays manageable for shorter trimming sessions.
A Few Highlights
- 10-foot reach covers most residential tree heights without a ladder.
- 28 ft/s chain speed handles softwood branches cleanly.
- Knob-based tensioning avoids tools for routine adjustments.
Practical Considerations
- Requires a heavy-gauge outdoor extension cord for safe operation.
- Long reach shifts balance forward, so extended sessions tire out arms and shoulders.
Made For
Suburban homeowners with mature trees who need occasional overhead trimming without climbing gear.
Reach For A Different Pick When
The WORX 20V 8″ Cordless Pole Saw (WG349) makes more sense for trimming farther from any outdoor outlet, where cordless freedom outweighs slightly less reach.
The WG349 trades a bit of bar size for genuinely low weight, coming in at 8.8 lbs with the battery attached. That makes a real difference during overhead work, where every extra pound compounds through the shoulders. The 8-inch bar and 20V battery platform keep it simple, and the tool-free chain tensioning system speeds up adjustments between cuts.
For routine pruning on smaller ornamental trees, fruit trees, and tall shrubs, this saw hits the mark. The 20V battery is shared with other WORX 20V tools, so existing owners can skip buying a second pack. The trade-off shows up in larger limbs, where the 8-inch bar reaches its limit quickly.
Everyday Perks
- Lightweight 8.8 lb build reduces fatigue during overhead pruning.
- Shares 20V batteries with the rest of the WORX cordless platform.
- Tool-free chain tensioning keeps adjustments simple.
Trade-Offs
- 8-inch bar limits cuts to smaller branches.
- 20V battery has less runtime than higher-voltage packs on bigger jobs.
Built With In Mind
Homeowners with smaller trees and shrubs who want a light cordless pole saw for routine pruning.
Where A Sibling Pick Shines
The WORX 20V 10″ 2-in-1 Pole Saw (WG323) is a smarter match when the ability to detach the pole and use the chainsaw at ground level matters for the same yard.
The WG323 combines a compact 10-inch chainsaw head with a detachable pole, giving one tool that handles both ground-level cuts and overhead pruning. At about 6.2 lbs for the chainsaw portion alone, it’s light enough to use one-handed for smaller bucking tasks. Auto-tension takes the guesswork out of chain adjustments, which matters for casual users who don’t want to fiddle with a tool every few cuts.
For homeowners who already own WORX 20V tools, this is a versatile add-on that replaces two separate purchases. The reach extends up to about 12 feet with the pole attached, which is enough for most single-story rooflines. Where it falls short is in continuous heavy cutting, where the 20V battery drains faster than higher-voltage platforms.
Notable Gains
- Two-in-one design handles both overhead trimming and ground-level bucking.
- Auto-tension system simplifies chain adjustments for less experienced users.
- 12-foot reach covers typical residential tree heights.
- Shares batteries with other WORX 20V outdoor tools.
Points To Keep In Mind
- 20V battery limits runtime compared to higher-voltage cordless platforms.
- 10-inch bar tops out at smaller-diameter branches and logs.
Who Will Love This
Homeowners invested in the WORX 20V platform who want one tool that handles both pruning and small bucking jobs.
A Better Fit Elsewhere
The EGO POWER+ 16″ Chain Saw (CS1610) is a stronger match for shoppers who already run the 56V ARC platform and need more bar length than the WG323 offers.
Choosing The Right Saw For Your Yard
Bar length is the first number to lock in, because it sets the upper limit on what you can cut in a single pass. Saws in the 16 to 20-inch range handle most residential firewood and storm cleanup, while 8 to 10-inch bar saws suit pruning and lighter limb work. Going larger than your typical job usually means carrying extra weight without a payoff.
Power source matters almost as much. Cordless saws have caught up to small gas engines for most homeowner use, and they’re quieter, start instantly, and skip fuel mixing. Corded saws trade mobility for unlimited runtime, which works for yards with reachable outlets. Gas saws still lead on raw power and runtime, but they add fuel costs, pull-starting, and exhaust.
Battery platform compatibility often gets overlooked, and it shouldn’t. Buying into EGO’s 56V or WORX’s 20V system means future batteries, chargers, and tools work together, which lowers the long-term cost of expanding the collection. The catch is being locked into one brand’s ecosystem once the batteries are on the shelf.
Weight and ergonomics decide whether you’ll actually use the saw or leave it in the garage. A saw that’s 2 lbs heavier sounds minor on paper, but it shows up after twenty minutes of overhead cuts. Pole saws in particular benefit from lower weight, because the lever arm amplifies every pound.
What Most Shoppers Overlook
Pitfalls Shoppers Hit
The most common mistake is buying a saw that’s either too small or too big for the work at hand. A 10-inch bar saw can’t fell a mature tree, and a 20-inch bar saw is overkill for trimming hedges. Another frequent issue is ignoring the battery platform: a cheaper bare-tool saw becomes expensive fast when no compatible battery is in the garage.
Storage and chain care also tend to get skipped. A scabbard, a backup chain, and bar oil all extend the life of the saw and protect everyone in the household. Treat those as part of the purchase, not optional extras.
Where The Extra Money Goes
Higher-tier saws typically add longer bars, brushless motors, and sturdier chain tensioning systems. For a homeowner with occasional weekend use, mid-tier options usually cover the work. The upgrade is worth it for daily users or anyone cutting harder, denser wood, where a more efficient motor and a tougher chain save time and reduce fatigue over long sessions.
